Intrepid Sourcing and Services

Solutions / Electronics / Electronics Prototype

Need an Electronics Prototype?


A rendering cannot tell you whether the board fits, the buttons line up or the product works as intended. We build an electronics prototype you can evaluate before committing to production. Start with finished design files or ask us to develop the missing electronics and enclosure details.

Pencil sketch of a rechargeable LED puck light with labels for the diffuser, button and charging port
Sketch
LED puck light parts laid out flat: diffuser, housing, LED board, battery and base
Parts
Exploded view of an LED puck light showing the diffuser, LED board, battery and housing
Build
Finished rechargeable LED puck light switched on
Finished

Development phase

$797 per prototype.

Scope

PCB or complete product.

Design protection

We sign an NDA before you share files.

Commitment

No production order required.

Making products for brands since 2013

KLM
Wag!
X Games
LED puck light prototype with its drawing, diffuser removed to show the LED board

What do you need to test?

The circuit board

Build a PCB prototype to check the circuit, components, connections and physical board dimensions.

The complete product

Combine the PCB, enclosure, controls and power system to see how the product works as one unit.

A revised design

Use a new prototype to evaluate an approved change before updating the production files.

What do you have ready?

Starting pointWhat happens next
You have finished technical files.Send the schematic, PCB files, bill of materials and enclosure files after we sign an NDA. We review the files before building.
You have a PCB design but no enclosure.We can develop the casing around the board, ports, controls and mounting points.
You have a concept but no technical design.Start with the design phase. We define the product and create the files needed for a prototype.

What a prototype should reveal

A useful electronics prototype answers specific questions. It should do more than show what the product might look like.

QuestionWhat it checks
Does the circuit work?The board must perform the functions defined in the product requirements.
Do the components fit?The PCB, battery, connectors and controls must fit within the enclosure.
Can the product be assembled?The casing must provide access for fastening, wiring and final assembly.
What needs to change?Testing may reveal a board, enclosure or component decision that should be revised before production.

Our process

How we build your prototype

01 Review your files and goals

We identify what the electronics prototype needs to prove and which files are ready for use.

02 Confirm the components

We review the bill of materials and source the parts needed for the prototype.

03 Make the PCB

We fabricate and assemble the prototype board using the approved manufacturing files.

04 Make the enclosure

When a complete product is required, we produce the casing using the development method suited to its design.

05 Assemble and evaluate the unit

We bring the board, enclosure and related parts together. The agreed functions and physical fit are checked.

You approve the prototype before production is quoted.

06 Record the approved changes

Any accepted revisions are added to the technical files and bill of materials before production is quoted.

Design files under review for a rechargeable LED light.
Components confirmed for a rechargeable LED light.
Bare and assembled prototype boards for a rechargeable LED light.
Prototype enclosure parts for a rechargeable LED light.
Prototype testing for a rechargeable LED light.
Approved changes recorded for a rechargeable LED light.

How much does prototype development cost?

The development phase costs $797 per electronics prototype. If the product still needs concept or design work, the design phase is $397 per design. Production is quoted separately.

PhasePriceWhat you receive
Design$397per designProduct concept, design review and an initial bill of materials.
Develop$797per prototypeTechnical files, PCB development, costing and prototype development.
CreateAt CostProduction setup, manufacturing, quality control and logistics monitoring.

The electronics prototype scope depends on the product. We confirm whether the project covers a PCB alone or a complete assembled device before the phase begins.

What happens after the prototype?

Review the prototype against the requirements defined at the start. Note which functions pass, which details need revision and which changes are optional.

Once the prototype is approved, we finalize the bill of materials and manufacturing files. We then prepare the production quote and proposed production checks.

You may also take the approved files to another manufacturer.

Common Questions We Get

What brands ask before they start.

Can you make only a PCB prototype?

Yes. We can build and assemble the board without making the complete device. We need the board files, bill of materials and testing requirements.

Can you prototype the entire product?

Yes. We can combine the PCB, enclosure and related parts into a complete unit.

Do my files have to be finished?

No. We can develop missing files before prototyping. If you send final files, we review them and identify any remaining production questions.

Can changes be made after the first electronics prototype?

Yes. The purpose of an electronics prototype is to identify changes before production. Significant changes may require another board or enclosure version.

Does a working electronics prototype mean the product is ready for production?

Not automatically. The technical files, bill of materials, assembly method and production checks must also be finalized.

Do I have to manufacture the product with you?

No. You can stop after prototype development and use your files elsewhere.

Where do you build an electronics prototype?

Prototype development is handled through our electronics operations in China. Production is available in our factories in China and Vietnam.

How is my design protected?

We sign an NDA before you share confidential files. You own the design files created for your project.

How do I get started?

An electronics prototype starts with a clear testing goal. Tell us which functions, dimensions or assembly details you need to evaluate. Include your current files and target production quantity if available.

What does your prototype need to prove?

Rechargeable LED puck lights in use under a kitchen cabinet
Final product